{"id":2065,"date":"2025-01-07T18:19:02","date_gmt":"2025-01-07T15:19:02","guid":{"rendered":"https:\/\/temmotor.com\/?page_id=2065"},"modified":"2025-01-07T18:19:02","modified_gmt":"2025-01-07T15:19:02","slug":"1-phase-mds-start-and-permanent-capacitor","status":"publish","type":"page","link":"https:\/\/www.temmotor.com\/en\/1-phase-mds-start-and-permanent-capacitor\/","title":{"rendered":"1 PHASE – MDS START AND PERMANENT CAPACITOR"},"content":{"rendered":"

1 PHASE – MDS START AND PERMANENT CAPACITOR<\/h2><\/div>
<\/div><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div>

A-Mechanical Properties<\/h2><\/div>

The motors are produced in single-phase, totally enclosed, short-circuit rotor, and fan-cooled designs among the IEC 63 – 90 frame sizes.<\/p>\n

Construction Type<\/strong> All frame sizes can be manufactured in foot-mounted, flange-mounted, and foot-flange configurations.<\/p>\n

Protection Class<\/strong><\/p>\n

a) The standard protection class is IP 54.<\/p>\n

b) Fixed ball bearings with ZZ covers are used for the bearings.<\/p>\n

c) The shaft ends are threaded according to DIN 332-2. A keyway is opened in accordance with DIN 6885-1. Motors are delivered with a key installed.<\/p>\n

d) The cooling fans are made of heat-resistant material and can operate in both directions.<\/p>\n

e) The paint is gray and resistant to corrosion. Different color applications can be made upon request.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

B-Construction Features<\/h2><\/div>

Stator Housing and Covers<\/strong> The housing and covers are made of aluminum alloy with heat conduction properties. The fan cover is made of sheet metal.<\/p>\n

Terminal Box<\/strong> It is located on the top of the housing and close to the shaft side. There is a permanent capacitor slot.<\/p>\n

Capacitors<\/strong> The motors are produced with permanent circuit capacitors.<\/p>\n<\/div>

C-Electrical Properties<\/h2><\/div>

Voltage and Frequency<\/strong>
\nThe motors are normally designed for 230V, 50 Hz. Motors can also be produced for different voltages and frequencies upon request.<\/p>\n

Technical Information<\/strong>
\nThe values provided in the table are valid under normal conditions for 230V voltage. The frequency of 50 Hz is valid for an ambient temperature of -20\u00b0C to +40\u00b0C. The operating time is S1. The sea level is 1000 m. The insulation class of the motors is F, which is resistant up to 155\u00b0C.<\/p>\n

Special Manufacturing<\/strong>
\nCustom shafts, special flanges, and motors with different voltages and frequencies, as well as motors with higher protection classes, fixed bearings, and self-cooling features, are produced upon request.<\/p>\n

Our motors are manufactured in accordance with IEC recommendations, DIN, and Turkish Standards TS 4239.<\/p>\n<\/div><\/div><\/div>

<\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

TECHNICAL INFORMATION<\/h2><\/span>
<\/div><\/div><\/div>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n1 Phase, 230 V, 50 Hz<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\nInsulation Class:<\/strong> F<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\nOperating Type:<\/strong> S1 (continuous operation)<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\nProtection Class:<\/strong> IP 55<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
TYPE<\/td>\nLOAD VALUES<\/td>\nSTARTING VALUES<\/td>\nStarting Moment Ratio \u00a0Mk\/ Mn<\/td>\n\u00a0 Starting Capacitor<\/td>\nPermanent Circuit Capacitor<\/td>\nApproximate Weight B3<\/td>\n<\/tr>\n
Power<\/td>\n<\/td>\nSpeed<\/td>\nCurrent<\/td>\nTorque<\/td>\nPower Factor\u0131<\/td>\nEfficiency \u03b7<\/td>\nCurrent Ratio<\/td>\nTorque Ratio<\/td>\n250 V\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00b5F<\/td>\n450 V\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00b5F<\/td>\n<\/tr>\n
kw<\/td>\nhp<\/td>\nV<\/td>\nd\/d<\/td>\nA<\/td>\nNm<\/td>\ncos \u03c6<\/td>\n%<\/td>\nIA\/IN<\/td>\nMA\/ MN<\/td>\nkg<\/td>\n<\/tr>\n
2 pole-3000 d\/d<\/td>\n<\/tr>\n
63 2A<\/td>\n0.18<\/td>\n0.25<\/td>\n230<\/td>\n2820<\/td>\n1.5<\/td>\n0.62<\/td>\n0.91<\/td>\n62<\/td>\n4.8<\/td>\n2.8<\/td>\n2.3<\/td>\n43 – 53<\/td>\n8<\/td>\n4.4<\/td>\n<\/tr>\n
63 2B<\/td>\n0.25<\/td>\n0.34<\/td>\n230<\/td>\n2860<\/td>\n1.55<\/td>\n0.84<\/td>\n0.96<\/td>\n71<\/td>\n5<\/td>\n2.4<\/td>\n2.1<\/td>\n43 – 53<\/td>\n10<\/td>\n4.8<\/td>\n<\/tr>\n
71 2A<\/td>\n0.37<\/td>\n0.50<\/td>\n230<\/td>\n2860<\/td>\n2.5<\/td>\n1.25<\/td>\n0.98<\/td>\n69<\/td>\n5<\/td>\n1.6<\/td>\n2<\/td>\n64 – 77<\/td>\n15<\/td>\n6.5<\/td>\n<\/tr>\n
71 2B<\/td>\n0.55<\/td>\n0.75<\/td>\n230<\/td>\n2835<\/td>\n3.9<\/td>\n1.86<\/td>\n0.98<\/td>\n70<\/td>\n5.3<\/td>\n3.1<\/td>\n2.5<\/td>\n124 – 149<\/td>\n20<\/td>\n7.9<\/td>\n<\/tr>\n
80 2a<\/td>\n0.37<\/td>\n0.50<\/td>\n230<\/td>\n2830<\/td>\n3.2<\/td>\n1.25<\/td>\n0.85<\/td>\n62<\/td>\n4.2<\/td>\n2.5<\/td>\n2.4<\/td>\n64 – 77<\/td>\n15<\/td>\n7.3<\/td>\n<\/tr>\n
\u00a0 80 2b<\/td>\n0.55<\/td>\n0.75<\/td>\n230<\/td>\n2840<\/td>\n3.9<\/td>\n1.86<\/td>\n0.98<\/td>\n70<\/td>\n5.3<\/td>\n3.1<\/td>\n2.5<\/td>\n124 – 149<\/td>\n20<\/td>\n8.1<\/td>\n<\/tr>\n
80 2A<\/td>\n0.75<\/td>\n1.0<\/td>\n230<\/td>\n2865<\/td>\n5.1<\/td>\n2.58<\/td>\n0.91<\/td>\n71<\/td>\n5.1<\/td>\n2.6<\/td>\n2.2<\/td>\n124 – 149<\/td>\n25<\/td>\n9.2<\/td>\n<\/tr>\n
80 2B<\/td>\n1.1<\/td>\n1.5<\/td>\n230<\/td>\n2820<\/td>\n7.5<\/td>\n3.75<\/td>\n0.92<\/td>\n72<\/td>\n4.3<\/td>\n2.3<\/td>\n2.1<\/td>\n124 – 149<\/td>\n25<\/td>\n10.5<\/td>\n<\/tr>\n
90 2a<\/td>\n0.75<\/td>\n1.0<\/td>\n230<\/td>\n2865<\/td>\n5.1<\/td>\n2.58<\/td>\n0.91<\/td>\n71<\/td>\n5.1<\/td>\n2.5<\/td>\n2.2<\/td>\n124 – 149<\/td>\n25<\/td>\n9.6<\/td>\n<\/tr>\n
90 2A<\/td>\n1.1<\/td>\n1.5<\/td>\n230<\/td>\n2890<\/td>\n7.4<\/td>\n3.75<\/td>\n0.91<\/td>\n71<\/td>\n5.9<\/td>\n3.2<\/td>\n3<\/td>\n145 – 175<\/td>\n30<\/td>\n11.6<\/td>\n<\/tr>\n
90 2B<\/td>\n1.5<\/td>\n2.0<\/td>\n230<\/td>\n2880<\/td>\n9.9<\/td>\n5<\/td>\n0.91<\/td>\n75<\/td>\n5.9<\/td>\n3.5<\/td>\n2.6<\/td>\n280 – 333<\/td>\n40<\/td>\n13.5<\/td>\n<\/tr>\n
90 2C<\/td>\n2.2<\/td>\n3.0<\/td>\n230<\/td>\n2830<\/td>\n13.6<\/td>\n7.55<\/td>\n0.93<\/td>\n79<\/td>\n4.8<\/td>\n3<\/td>\n2.2<\/td>\n280 – 333<\/td>\n50<\/td>\n16.4<\/td>\n<\/tr>\n
4 pole-1500 d\/d<\/td>\n<\/tr>\n
63 4A<\/td>\n0.12<\/td>\n0.16<\/td>\n230<\/td>\n1430<\/td>\n0.9<\/td>\n0.80<\/td>\n0.92<\/td>\n66<\/td>\n5.7<\/td>\n2.3<\/td>\n1.9<\/td>\n43 – 53<\/td>\n8<\/td>\n4.4<\/td>\n<\/tr>\n
63 4B<\/td>\n0.18<\/td>\n0.25<\/td>\n230<\/td>\n1420<\/td>\n1.5<\/td>\n1.22<\/td>\n0.95<\/td>\n58<\/td>\n4.6<\/td>\n2.6<\/td>\n2.1<\/td>\n43 – 53<\/td>\n15<\/td>\n5.2<\/td>\n<\/tr>\n
71 4a<\/td>\n0.18<\/td>\n0.25<\/td>\n230<\/td>\n1410<\/td>\n1.5<\/td>\n1.23<\/td>\n0.84<\/td>\n62<\/td>\n4.6<\/td>\n2.5<\/td>\n1,6<\/td>\n43 – 53<\/td>\n10<\/td>\n5.3<\/td>\n<\/tr>\n
71 4A<\/td>\n0.25<\/td>\n0.34<\/td>\n230<\/td>\n1410<\/td>\n2<\/td>\n1.7<\/td>\n0.84<\/td>\n67<\/td>\n4.2<\/td>\n2.3<\/td>\n2.1<\/td>\n43 – 53<\/td>\n10<\/td>\n6.2<\/td>\n<\/tr>\n
71 4B<\/td>\n0.37<\/td>\n0.50<\/td>\n230<\/td>\n1390<\/td>\n2.95<\/td>\n2.55<\/td>\n0.92<\/td>\n62<\/td>\n4.1<\/td>\n2.2<\/td>\n1.9<\/td>\n64 – 77<\/td>\n15<\/td>\n7.1<\/td>\n<\/tr>\n
80 4a<\/td>\n0.37<\/td>\n0.50<\/td>\n230<\/td>\n1420<\/td>\n2.95<\/td>\n2.52<\/td>\n0.82<\/td>\n62<\/td>\n4.1<\/td>\n2.2<\/td>\n1.9<\/td>\n64 – 77<\/td>\n15<\/td>\n7.8<\/td>\n<\/tr>\n
80 4A<\/td>\n0.55<\/td>\n0.75<\/td>\n230<\/td>\n1420<\/td>\n3.8<\/td>\n3.75<\/td>\n0.88<\/td>\n74<\/td>\n4.8<\/td>\n2.3<\/td>\n1.8<\/td>\n124 – 149<\/td>\n20<\/td>\n9.3<\/td>\n<\/tr>\n
80 4B<\/td>\n0.75<\/td>\n1.0<\/td>\n230<\/td>\n1420<\/td>\n5.5<\/td>\n5<\/td>\n0.88<\/td>\n70<\/td>\n4.3<\/td>\n1.8<\/td>\n1.9<\/td>\n124 – 149<\/td>\n25<\/td>\n10.7<\/td>\n<\/tr>\n
90 4a<\/td>\n0.55<\/td>\n0.75<\/td>\n230<\/td>\n1420<\/td>\n3.8<\/td>\n3.75<\/td>\n0.84<\/td>\n74<\/td>\n4.8<\/td>\n2.3<\/td>\n1.8<\/td>\n124 – 149<\/td>\n20<\/td>\n9.3<\/td>\n<\/tr>\n
90 4b<\/td>\n0.75<\/td>\n1.0<\/td>\n230<\/td>\n1420<\/td>\n5.5<\/td>\n5<\/td>\n0.84<\/td>\n76<\/td>\n5.2<\/td>\n2.7<\/td>\n2<\/td>\n145 – 175<\/td>\n25<\/td>\n11.2<\/td>\n<\/tr>\n
90S 4B<\/td>\n1.1<\/td>\n1.5<\/td>\n230<\/td>\n1400<\/td>\n7.2<\/td>\n7.5<\/td>\n0.93<\/td>\n75<\/td>\n5.5<\/td>\n2.6<\/td>\n1.9<\/td>\n189 – 227<\/td>\n30<\/td>\n13.4<\/td>\n<\/tr>\n
90L 4C<\/td>\n1.5<\/td>\n2.0<\/td>\n230<\/td>\n1400<\/td>\n9.5<\/td>\n10<\/td>\n0.93<\/td>\n77<\/td>\n5<\/td>\n2.4<\/td>\n1.9<\/td>\n189 – 227<\/td>\n40<\/td>\n14.6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/span><\/div>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Structure Size<\/td>\nNumber of Poles<\/td>\nMAIN DIMENSIONS<\/td>\nFOOTED MOTORS<\/td>\nSHAFT END<\/td>\nFLANGED MOTORS<\/td>\n<\/tr>\n
AC\u00f8<\/td>\nL<\/td>\nH<\/td>\nHD<\/td>\nHA<\/td>\nA<\/td>\nAB<\/td>\nK1<\/td>\nB<\/td>\nBB<\/td>\nK\u00f8<\/td>\nC<\/td>\nD\u00f8(1)<\/sup><\/td>\nE<\/td>\nDB<\/td>\nGA<\/td>\nFxG(2)<\/sup><\/td>\nStructure Shape<\/td>\nP\u00f8<\/td>\nN\u00f8(3)<\/sup><\/td>\nM\u00f8<\/td>\nS\u00f8<\/td>\nT<\/td>\nAD ~<\/td>\n<\/tr>\n
63<\/td>\n2-4<\/td>\n122<\/td>\n205<\/td>\n63<\/td>\n180<\/td>\n7<\/td>\n100<\/td>\n120<\/td>\n10<\/td>\n80<\/td>\n102<\/td>\n7<\/td>\n40<\/td>\n11<\/td>\n23<\/td>\nM4<\/td>\n12.5<\/td>\n4×4<\/td>\nB5<\/td>\n140<\/td>\n95<\/td>\n115<\/td>\n10<\/td>\n3<\/td>\n141<\/td>\n<\/tr>\n
B14<\/td>\n90<\/td>\n60<\/td>\n75<\/td>\nM5<\/td>\n3<\/td>\n<\/tr>\n
71<\/td>\n2-4<\/td>\n139<\/td>\n243<\/td>\n71<\/td>\n180<\/td>\n8<\/td>\n112<\/td>\n135<\/td>\n11<\/td>\n90<\/td>\n109<\/td>\n7<\/td>\n45<\/td>\n14<\/td>\n30<\/td>\nM5<\/td>\n16<\/td>\n5×5<\/td>\nB5<\/td>\n160<\/td>\n110<\/td>\n130<\/td>\n10<\/td>\n3<\/td>\n149<\/td>\n<\/tr>\n
B14<\/td>\n105<\/td>\n70<\/td>\n85<\/td>\nM6<\/td>\n3<\/td>\n<\/tr>\n
80<\/td>\n2-4<\/td>\n155<\/td>\n278<\/td>\n80<\/td>\n210<\/td>\n9<\/td>\n125<\/td>\n152<\/td>\n13<\/td>\n100<\/td>\n129<\/td>\n9<\/td>\n50<\/td>\n19<\/td>\n40<\/td>\nM6<\/td>\n21.5<\/td>\n6×6<\/td>\nB5<\/td>\n200<\/td>\n130<\/td>\n165<\/td>\n12<\/td>\n3<\/td>\n153<\/td>\n<\/tr>\n
B14<\/td>\n120<\/td>\n80<\/td>\n100<\/td>\nM6<\/td>\n3<\/td>\n<\/tr>\n
90<\/td>\n2-4<\/td>\n171<\/td>\n312<\/td>\n90<\/td>\n248<\/td>\n12<\/td>\n140<\/td>\n180<\/td>\n15<\/td>\n100<\/td>\n130<\/td>\n10<\/td>\n56<\/td>\n24<\/td>\n50<\/td>\nM8<\/td>\n31<\/td>\n8×7<\/td>\nB5<\/td>\n200<\/td>\n130<\/td>\n165<\/td>\n12<\/td>\n3.5<\/td>\n158<\/td>\n<\/tr>\n
B14<\/td>\n142<\/td>\n110<\/td>\n130<\/td>\nM8<\/td>\n3.5<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
( 1 ) Tolerance ISO ” k6 “<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\nAll dimensions are in mm.<\/td>\n<\/tr>\n
( 2 ) According to DIN 6885<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
( 3 ) Tolerance ISO ” j6 “<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","footnotes":""},"class_list":["post-2065","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2065","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/comments?post=2065"}],"version-history":[{"count":0,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2065\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/media?parent=2065"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}