MILKING MACHINE MOTORS<\/h2><\/div><\/div><\/div><\/div><\/div>![](\"https:\/\/www.temmotor.com\/wp-content\/uploads\/2021\/09\/sut-sagim-makine-motorlari.jpg\" "\\"sut-sagim-makine-motorlari\\"")
<\/span><\/div><\/div><\/div>A-Mechanical Properties<\/h2><\/div>Motors are produced in IEC 90 type frame sizes, single-phase, totally enclosed, short-circuit rotor, and fan-cooled.<\/p>\n
Construction Type<\/strong> All frame sizes can be made in footed, flanged, and footed-flanged construction types.<\/p>\nProtection Class<\/strong><\/p>\na) The standard protection class is IP 55.<\/p>\n
b) Bearings use fixed ball bearings with ZZ covers.<\/p>\n
d) Cooling fans are made from heat-resistant material and have the ability to operate in both directions. e) The paint is black and resistant to corrosion. Different color applications can be made upon request.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
B-Construction Features<\/h2><\/div>Stator Housing and Covers<\/strong> The housing and covers are made of aluminum alloy with heat-conducting properties. The fan cover is made of sheet metal.<\/p>\nTerminal Box<\/strong> It is located on the top of the housing and is close to the shaft side. A permanent capacitor socket is available.<\/p>\nCapacitors<\/strong> The motors are produced with permanent circuit capacitors.<\/p>\n<\/div>C-Electrical Properties<\/h2><\/div>Voltage and Frequency<\/strong> Motors are normally designed for 230V, 50 Hz. Motors can also be produced for different voltages and frequencies upon request.<\/p>\nTechnical Information<\/strong> The values given in the table are valid for normal conditions and are applicable for 230V voltage. The frequency is 50 Hz, and the ambient temperature range is from -20\u00b0C to +40\u00b0C. The duty cycle is S1. The altitude is 1000 m above sea level. The insulation class of the motors is F, and they are resistant up to 155\u00b0C.<\/p>\nSpecial Productions<\/strong> Custom shafts, special flanges, and motors with different voltages and frequencies, as well as higher protection class, fixed-bearing, self-cooled motors, are produced upon request.<\/p>\nOur motors are manufactured in accordance with IEC recommendations, DIN standards, and Turkish Standards TS 4239.<\/p>\n<\/div><\/div><\/div>
![](\"https:\/\/www.temmotor.com\/wp-content\/uploads\/2021\/10\/temmotor-elektirikli-2-1.jpg\" "\\"temmotor-elektirikli-2\\"")
<\/span><\/div><\/div><\/div><\/div><\/div>Technical Data of Milk Extraction Machine Motors<\/h2><\/div><\/div><\/div><\/div><\/div>\n\u00a0<\/p>\n\n\n\nTYPE<\/td>\n VALUES UNDER LOAD<\/td>\n STARTING VALUES<\/td>\n Starting Torque Ratio Mk\/ Mn<\/td>\n Capacitor<\/td>\n Approximate Weight B3<\/td>\n<\/tr>\n \nPower<\/td>\n Speed<\/td>\n Current<\/td>\n Torque<\/td>\n Power Factor<\/td>\n Efficiency \u03b7<\/td>\n Current Ratio<\/td>\n Torque Ratio<\/td>\n<\/tr>\n \nkW<\/td>\n hp<\/td>\n rpm<\/td>\n A<\/td>\n Nm<\/td>\n cos \u03c6<\/td>\n %<\/td>\n IA\/IN<\/td>\n MA\/ MN<\/td>\n \u03bcF<\/td>\n kg<\/td>\n<\/tr>\n \nSSM904A<\/td>\n 0.55<\/td>\n 0.75<\/td>\n 1435<\/td>\n 4.4<\/td>\n 3.77<\/td>\n 0.99<\/td>\n 68<\/td>\n 3.5<\/td>\n 0.55<\/td>\n 1.8<\/td>\n 25<\/td>\n<\/tr>\n \nSSM904B<\/td>\n 0.75<\/td>\n 1.0<\/td>\n 1420<\/td>\n 4.95<\/td>\n 5.1<\/td>\n 0.88<\/td>\n 69<\/td>\n 4.5<\/td>\n 0.65<\/td>\n 1.8<\/td>\n 25<\/td>\n<\/tr>\n \nSSM904C<\/td>\n 1.1<\/td>\n 1.5<\/td>\n 1410<\/td>\n 7.1<\/td>\n 7.5<\/td>\n 0.91<\/td>\n 69<\/td>\n 4.5<\/td>\n 0.65<\/td>\n 1.8<\/td>\n 35<\/td>\n<\/tr>\n \nSSM90L4C<\/td>\n 1.5<\/td>\n 2.0<\/td>\n 1405<\/td>\n 9.5<\/td>\n 10.2<\/td>\n 0.88<\/td>\n 67<\/td>\n 4.5<\/td>\n 0.60<\/td>\n 1.6<\/td>\n 45<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n![](\"https:\/\/www.temmotor.com\/wp-content\/uploads\/2021\/10\/sut-sagim-makine-motorlari-2.jpg\" "\\"sut-sagim-makine-motorlari-2\\"")
<\/span><\/div><\/div><\/div>![](\"https:\/\/www.temmotor.com\/wp-content\/uploads\/2021\/10\/sut-sagim-makine-motorlari-3.jpg\" "\\"sut-sagim-makine-motorlari-3\\"")
<\/span><\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","footnotes":""},"class_list":["post-2077","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2077","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/comments?post=2077"}],"version-history":[{"count":0,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2077\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/media?parent=2077"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/span><\/div><\/div><\/div>A-Mechanical Properties<\/h2><\/div>Motors are produced in IEC 90 type frame sizes, single-phase, totally enclosed, short-circuit rotor, and fan-cooled.<\/p>\n
Construction Type<\/strong> All frame sizes can be made in footed, flanged, and footed-flanged construction types.<\/p>\nProtection Class<\/strong><\/p>\na) The standard protection class is IP 55.<\/p>\n
b) Bearings use fixed ball bearings with ZZ covers.<\/p>\n
d) Cooling fans are made from heat-resistant material and have the ability to operate in both directions. e) The paint is black and resistant to corrosion. Different color applications can be made upon request.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
B-Construction Features<\/h2><\/div>Stator Housing and Covers<\/strong> The housing and covers are made of aluminum alloy with heat-conducting properties. The fan cover is made of sheet metal.<\/p>\nTerminal Box<\/strong> It is located on the top of the housing and is close to the shaft side. A permanent capacitor socket is available.<\/p>\nCapacitors<\/strong> The motors are produced with permanent circuit capacitors.<\/p>\n<\/div>C-Electrical Properties<\/h2><\/div>Voltage and Frequency<\/strong> Motors are normally designed for 230V, 50 Hz. Motors can also be produced for different voltages and frequencies upon request.<\/p>\nTechnical Information<\/strong> The values given in the table are valid for normal conditions and are applicable for 230V voltage. The frequency is 50 Hz, and the ambient temperature range is from -20\u00b0C to +40\u00b0C. The duty cycle is S1. The altitude is 1000 m above sea level. The insulation class of the motors is F, and they are resistant up to 155\u00b0C.<\/p>\nSpecial Productions<\/strong> Custom shafts, special flanges, and motors with different voltages and frequencies, as well as higher protection class, fixed-bearing, self-cooled motors, are produced upon request.<\/p>\nOur motors are manufactured in accordance with IEC recommendations, DIN standards, and Turkish Standards TS 4239.<\/p>\n<\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>Technical Data of Milk Extraction Machine Motors<\/h2><\/div><\/div><\/div><\/div><\/div>\n\u00a0<\/p>\n\n\n\nTYPE<\/td>\n VALUES UNDER LOAD<\/td>\n STARTING VALUES<\/td>\n Starting Torque Ratio Mk\/ Mn<\/td>\n Capacitor<\/td>\n Approximate Weight B3<\/td>\n<\/tr>\n \nPower<\/td>\n Speed<\/td>\n Current<\/td>\n Torque<\/td>\n Power Factor<\/td>\n Efficiency \u03b7<\/td>\n Current Ratio<\/td>\n Torque Ratio<\/td>\n<\/tr>\n \nkW<\/td>\n hp<\/td>\n rpm<\/td>\n A<\/td>\n Nm<\/td>\n cos \u03c6<\/td>\n %<\/td>\n IA\/IN<\/td>\n MA\/ MN<\/td>\n \u03bcF<\/td>\n kg<\/td>\n<\/tr>\n \nSSM904A<\/td>\n 0.55<\/td>\n 0.75<\/td>\n 1435<\/td>\n 4.4<\/td>\n 3.77<\/td>\n 0.99<\/td>\n 68<\/td>\n 3.5<\/td>\n 0.55<\/td>\n 1.8<\/td>\n 25<\/td>\n<\/tr>\n \nSSM904B<\/td>\n 0.75<\/td>\n 1.0<\/td>\n 1420<\/td>\n 4.95<\/td>\n 5.1<\/td>\n 0.88<\/td>\n 69<\/td>\n 4.5<\/td>\n 0.65<\/td>\n 1.8<\/td>\n 25<\/td>\n<\/tr>\n \nSSM904C<\/td>\n 1.1<\/td>\n 1.5<\/td>\n 1410<\/td>\n 7.1<\/td>\n 7.5<\/td>\n 0.91<\/td>\n 69<\/td>\n 4.5<\/td>\n 0.65<\/td>\n 1.8<\/td>\n 35<\/td>\n<\/tr>\n \nSSM90L4C<\/td>\n 1.5<\/td>\n 2.0<\/td>\n 1405<\/td>\n 9.5<\/td>\n 10.2<\/td>\n 0.88<\/td>\n 67<\/td>\n 4.5<\/td>\n 0.60<\/td>\n 1.6<\/td>\n 45<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/span><\/div><\/div><\/div><\/span><\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","footnotes":""},"class_list":["post-2077","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2077","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/comments?post=2077"}],"version-history":[{"count":0,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2077\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/media?parent=2077"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Motors are produced in IEC 90 type frame sizes, single-phase, totally enclosed, short-circuit rotor, and fan-cooled.<\/p>\n
Construction Type<\/strong> All frame sizes can be made in footed, flanged, and footed-flanged construction types.<\/p>\n Protection Class<\/strong><\/p>\n a) The standard protection class is IP 55.<\/p>\n b) Bearings use fixed ball bearings with ZZ covers.<\/p>\n d) Cooling fans are made from heat-resistant material and have the ability to operate in both directions. e) The paint is black and resistant to corrosion. Different color applications can be made upon request.<\/p>\n<\/div><\/div><\/div><\/div><\/div> Stator Housing and Covers<\/strong> The housing and covers are made of aluminum alloy with heat-conducting properties. The fan cover is made of sheet metal.<\/p>\n Terminal Box<\/strong> It is located on the top of the housing and is close to the shaft side. A permanent capacitor socket is available.<\/p>\n Capacitors<\/strong> The motors are produced with permanent circuit capacitors.<\/p>\n<\/div> Voltage and Frequency<\/strong> Motors are normally designed for 230V, 50 Hz. Motors can also be produced for different voltages and frequencies upon request.<\/p>\n Technical Information<\/strong> The values given in the table are valid for normal conditions and are applicable for 230V voltage. The frequency is 50 Hz, and the ambient temperature range is from -20\u00b0C to +40\u00b0C. The duty cycle is S1. The altitude is 1000 m above sea level. The insulation class of the motors is F, and they are resistant up to 155\u00b0C.<\/p>\n Special Productions<\/strong> Custom shafts, special flanges, and motors with different voltages and frequencies, as well as higher protection class, fixed-bearing, self-cooled motors, are produced upon request.<\/p>\n Our motors are manufactured in accordance with IEC recommendations, DIN standards, and Turkish Standards TS 4239.<\/p>\n<\/div><\/div><\/div>B-Construction Features<\/h2><\/div>
C-Electrical Properties<\/h2><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>Technical Data of Milk Extraction Machine Motors<\/h2><\/div>
\n\n
\n TYPE<\/td>\n VALUES UNDER LOAD<\/td>\n STARTING VALUES<\/td>\n Starting Torque Ratio Mk\/ Mn<\/td>\n Capacitor<\/td>\n Approximate Weight B3<\/td>\n<\/tr>\n \n Power<\/td>\n Speed<\/td>\n Current<\/td>\n Torque<\/td>\n Power Factor<\/td>\n Efficiency \u03b7<\/td>\n Current Ratio<\/td>\n Torque Ratio<\/td>\n<\/tr>\n \n kW<\/td>\n hp<\/td>\n rpm<\/td>\n A<\/td>\n Nm<\/td>\n cos \u03c6<\/td>\n %<\/td>\n IA\/IN<\/td>\n MA\/ MN<\/td>\n \u03bcF<\/td>\n kg<\/td>\n<\/tr>\n \n SSM904A<\/td>\n 0.55<\/td>\n 0.75<\/td>\n 1435<\/td>\n 4.4<\/td>\n 3.77<\/td>\n 0.99<\/td>\n 68<\/td>\n 3.5<\/td>\n 0.55<\/td>\n 1.8<\/td>\n 25<\/td>\n<\/tr>\n \n SSM904B<\/td>\n 0.75<\/td>\n 1.0<\/td>\n 1420<\/td>\n 4.95<\/td>\n 5.1<\/td>\n 0.88<\/td>\n 69<\/td>\n 4.5<\/td>\n 0.65<\/td>\n 1.8<\/td>\n 25<\/td>\n<\/tr>\n \n SSM904C<\/td>\n 1.1<\/td>\n 1.5<\/td>\n 1410<\/td>\n 7.1<\/td>\n 7.5<\/td>\n 0.91<\/td>\n 69<\/td>\n 4.5<\/td>\n 0.65<\/td>\n 1.8<\/td>\n 35<\/td>\n<\/tr>\n \n SSM90L4C<\/td>\n 1.5<\/td>\n 2.0<\/td>\n 1405<\/td>\n 9.5<\/td>\n 10.2<\/td>\n 0.88<\/td>\n 67<\/td>\n 4.5<\/td>\n 0.60<\/td>\n 1.6<\/td>\n 45<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n <\/span><\/div><\/div><\/div><\/span><\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","footnotes":""},"class_list":["post-2077","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2077","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/comments?post=2077"}],"version-history":[{"count":0,"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/pages\/2077\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.temmotor.com\/en\/wp-json\/wp\/v2\/media?parent=2077"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}